Annalee Doll Description: Last one. Due to the size, this can only ship USPS. I have to create a custom box and USPS boxes are perfect for this. Red wooden stand and dowel for the 48" and 42" bunnies, scarecrows, clowns and Santa's.
Annalee Doll Description: Last one. Wooden rocking horse that originally was used on item 723295 - 7" PJ Kid on Rocking Horse. This came from the Annalee Gift Shop. Add to any of the 7" Annalee Kids!
Annalee Doll Description: Last one. Metal stand for the 18", 29" and 30" bunnies, scarecrows, clowns and Santa's. It is 16" tall and 8" in diameter. Stand can easily be covered with snow, felt or grass. You will need to slide it up the leg of the doll where the hole is. On the 29" - 30" dolls, there will be a plastic tube inside the leg connected to the frame of the doll. You will have to carefully get the tip of the metal stand in it and then carefully push up. BE CAREFUL NOT TO PUSH THE METAL THROUGH THE BODY OF THE DOLL. If you purchase this stand along with any dolls, I'll be happy to do it for you. Please request this in the Notes section when placing the order. The stand is really for 18" dolls but works pretty good for the 29" and 30" dolls. I haven't found anything better yet, so I recommend using this. Stand will be shipped flat so it will need to be positioned upon receipt.
Annalee Doll Description: Last one. 16"H x 12" x 12". Removable mirror back. Great to display the Uncle Sam or any grouping of dolls. Larger size is 907293.
Annalee Doll Description: 18"long x 16" high x 12"deep. Removable mirror back. Great to display the Pony Express Rider, Canadian Mountie or any grouping of dolls. Smaller size is 907193. Missing the 4 little wooden pegs on the top of the case that were used for stacking another one on top. They also hide the screws.
Annalee Doll Description: White with red pin stripe with painted on holly and berries with the Annalee "A" on the back. 18" long and 9" high and 7" wide. Great for 18" Santas, Elves, Gnomes, PJ kids, etc. Perfect for the 2019 15" Traditional Santa with Gift Bag - item 410819, 13" Traditional Mrs Santa with Snowball Wreath and the 12" Traditional Reindeer Set of 8 - item 460419. Just remove the base of the Santa and have him riding in the sleigh.
Annalee Doll Description: A great way to display your favorite dolls and at the same time protecting them. Fits 10" dolls and smaller. Glass is thick compared to the domes that were used in the 80's -90's. Color of wooden base may vary. Width might be 7.75".
Annalee Doll Description: 12" tall x 7.75" wide. Fits the wooden bases for the 10" Collector Series, Nativity, Spirit of 76, Folk Heroes and Annalee Collector Dolls. This dome was used in the 80's - 90's and is the replacement for any ones that have broken through the years. To order the wood base, see item "woodbase".
Annalee Doll Description: 5" long x 2" wide x 1.25" tall. This was handmade by Annalees' husband Chip Thorndike. This boat was used on the 3" Fishing Santa ornament - item 783693. Perfect to display with your Summer Wannabe Mice, fishing and beach Annalee Dolls. Complimenting Saw Horses are item 969501. Boat may vary slightly from photo.
Annalee Doll Description: Last one. 5" long x 2.50" wide x 2" tall. This was handmade by Annalees' husband Chip Thorndike. It is numbered 117 on the right front and signed "Chip" on the left front. This boat is totally different than the others that were made by Chip. It was made with two different types of wooden. Very nicely done. Perfect to display with your Summer Wannabe Mice, fishing and beach Annalee Dolls. Complimenting Saw Horses are item 969501.
Annalee Doll Description: Last one. 4" long x 1.5" wide x 1" tall. This was handmade by Annalees' husband Chip Thorndike. It is numbered 206 on the right front and signed "Chip" on the left front. Perfect to display with your Summer Wannabe Mice, fishing and beach Annalee Dolls. Complimenting Saw Horses are item 969501.
Annalee Doll Description: Last one. 4.5" long x 2.25" wide x 1.25" tall. This was handmade by Annalees' husband Chip Thorndike. It is numbered 208 on the right front and signed "Chip" on the left front. Perfect to display with your Summer Wannabe Mice, fishing and beach Annalee Dolls. Complimenting Saw Horses are item 969501.
Annalee Doll Description: Last one. 6" long x 2.75" wide x 1.75" tall. This was handmade by Annalees' husband Chip Thorndike. It is numbered 254 and dated 11/23/94 on the left front and signed "Chip" on the right front. This boat is different than the others due to the shape and the different pieces of wood used to creste it. Very nicely done. Perfect to display with your Summer Wannabe Mice, fishing and beach Annalee Dolls. Complimenting Saw Horses are item 969501.
Annalee Doll Description: Last one. 6.5" long x 3" wide x 1.75" tall. This was handmade by Annalees' husband Chip Thorndike. It is signed on the right front and numbered by Chip #365. It is also signed on the back "Chip". It was made special for Joanna DeSesa, a dedicated employee. It has Joanna in the front on the left side. Perfect to display with your Summer Wannabe Mice, fishing and beach Annalee Dolls. Complimenting Saw Horses are item 969501.
Annalee Doll Description: Last one. 14" long x 4.25" wide x 2.25" tall. Used on 10" Mr/ Mrs Fishing Santa. Perfect to display with your Summer Wannabe Mice, fishing and beach Annalee Dolls. Complimenting Saw Horses are item 969501.
Annalee Doll Description: Set of two Wooden Saw Horses 4" long x 3" wide x 2.50" tall. Perfect to display with your carpenter and boating Annalee dolls. Style and size may vary from photo.
Annalee Doll Description: 8" long x 4" wide x 1.5" high. Used on 7" Fishing Mouse. Perfect to display with your Summer Wannabe Mice, fishing and beach Annalee Dolls. Complimenting Saw Horses are item 969501.
Annalee Doll Description: 14" long x 11.5 high x 3.5 wide. Annalee Gift Shop Exclusive. Perfect to use to hang and display your Annalee Dolls. Great to use in your window or your steps going upstairs! Made in Meredith, NH USA.
Annalee Doll Description: Ski chair lift for one or two 7" or 10" Annalee ski dolls. 10" high, 6" wide and 3" deep, aluminum frame and pine seat. Designed by Chip in the 50's. Skier. Have one with a blue chair and one with green, please specify when ordering.
10" tall x 7" wide. Plastic - Acrylic material. Perfect to display any Annalee up to 9" tall. Looks great in the kitchen.
Annalee Doll Description: 13" tall x 8" wide. Plastic - Acrylic material. Fits the wooden bases for the 10" Collector Series, Nativity, Spirit of 76, Folk Heroes and Annalee Collector Dolls. Can be used as a replacement for the ones that have broken through the years.
Annalee Doll Description: 18" x 24" Poster of the Artist Proof of Annie Oakley. Edges may be wrinkled due to storage, otherwise Mint. Photo shows glare, but actual poster has vibrant colors. Perfect gift for any Annie Oakley collector.
Annalee Doll Description: Apron that was worn by Gift Shop Employees. Has three pouches in the front. Adjustable neck strap. Slight wear marks on the chest area. Two faint stains near the pocker area. Great gift for anyone to wear in their kitchen or at the grill when cooking.
Annalee Doll Description: Apron that was worn by Gift Shop Employees. Has three pouches in the front. Adjustable neck strap. Two spots on the front. Great gift for anyone to wear in their kitchen or at the grill when cooking.
Annalee Doll Description: Wooden base for glass dome item - domesm. Dome is 10.5" high x 5.5" wide. Fits 3", 5" and 7" dolls. 10 1/2" in height to the center and 5 1/2" diameter. Fits the Doll Society Penguin.
Annalee Doll Description: 4" tan personalized base "Best Teacher Thank you". This is part of the "Made in America Series and was not in the regular Annalee line. Perfect gift for your favorite teacher.
Annalee Doll Description: 8" long, 5.5" high.This bike was made and designed by Chip, Annalee's husband. It was originally used for item 524798 - 7" Pedaling Santa. Can be used with any 5" to 7" Mouse, Santa, Elf, Gnome, Bunny, etc.
Annalee Doll Description: Item is for just the bike only, not the two dolls. This bike was made and designed by Chip Thorndike, Annalee's husband. It was originally used for the 25" Country Kids but can be used for any 25" - 30" Santa, Elf, Gnome, Bunny, etc.
Annalee Doll Description: Red brick, white and grey. 4" tall and 3.5" wide. Great for 7" Santas or Mice. Cardboard chimney will ship flat - unassembled. Perfect for any Christmas display or winter scene.
Annalee Doll Description: 4" tan personalized base "Congratulations". This is part of the "Made in America Series and was not in the regular Annalee line. Size of font may vary slightly from photo and it may or may not have the - !.
Annalee Doll Description: White, black and red with trim. 6" long and 4" high and 3" wide. Great for 7" Santas or Mice. Sleigh will ship flat - unassembled.
Annalee Doll Description: 10.5" high x 5.5" wide. Fits 3", 5" and 7" dolls. 10 1/2" in height to the center and 5 1/2" diameter. Fits the Doll Society Penguin.
Annalee Doll Description: Approximately 11" high x 6" wide. Fits 3", 5" and 7" dolls. Glass dome is 10 1/2" in height to the center and 5 1/2" diameter. Originally designed for the Doll Society Penguin.
Annalee Doll Description: Approximately 11" high x 6" wide. Fits 3", 5" and 7" dolls. Glass dome is 10 1/2" in height to the center and 5 1/2" diameter. Originally designed for the Doll Society Penguin.
Annalee Doll Description: 7" high x 4" wide. 7" in height to the center and 4" diameter. Fits 3" dolls and ornaments and pins.
Annalee Doll Description: Last one. 4" tan personalized base " To My Favorite Doctor". This is part of the "Made in America Series and was not in the regular Annalee line.
Annalee Doll Description: Last one. 4" tan personalized base " To My Favorite Nurse". This is part of the "Made in America Series and was not in the regular Annalee line.
Annalee Doll Description: Annalee 4" tan "To My Favorite Teacher" personalized base. Annalee Gift Shop Exclusive - Assembled in America Collection. Compliments item 253313 or any other teacher mouse. Wording may be on one or two lines.
Annalee Doll Description: Last one. Annalee 4" pink "To My Favorite Teacher" personalized base. Annalee Gift Shop Exclusive - Assembled in America Collection. Compliments item 253313 or any other teacher mouse.
Annalee Doll Description: Plastic brass french horn used for Angels and Santas. 5" x 2.5". Many people have been purchasing this to use with their American Girl Dolls.
Annalee Doll Description: Plastic brass french horn accented with white and gold garland. Used on the Lyrical Angel item 711001. 5" x 2.5" . Many people have been purchasing this to use with their American Girl Dolls. The garland can be removed, it is only hot glued on.
Annalee Doll Description: Last one. 4" light purple personalized base "Get Well Soon". This is part of the "Made in America Series and was not in the regular Annalee line.
Annalee Doll Description: 7 1/2 inches tall. Black plastic golf club was used on the 7" Golfer Mouse in the 70's - 80's. Great for customizing any Annalee doll.
Annalee Doll Description: 7 inches tall. Black plastic golf club was used on the 7" Golfer Mouse in the 70's - 80's. Great for customizing any Annalee doll.
Annalee Doll Description: 4" tourquoise personalized base "Happy Mother's Day". This is part of the "Made in America Series and was not in the regular Annalee line.
Annalee Doll Description: 4" tall x 5" daimeter. Was originally used on the the New Years Celebration Mice - items 971099 and 820601. It is new but may have a few faint scratches due to storage. Perfect to use for New Years, Birthdays, Weddings, Bridal Showers, Graduation and more!
Annalee Doll Description: Last one. Olive green bang hat with doll head wearing miniature red bang hat, open eyes, open mouth. This doll came from the Annalee Museum. A bang hat is a faux fur hat with thin wire frame that allows the hat to be bent into any shape imaginable. A flick of the wrist and it's a beanie; another flick and it's over your ears; a left twist gives it a Cossack flavor, or for laughs it can be worn straight up, down, out, in and sideways. Each of the hats is topped with a miniature doll's face wearing a mini version of the bang hat. This may have been designed for a child because it does not have any wire in the bottom and is much shorter.